Toyota Landcruiser 200 Series PDI Heavy Duty Transmission Cooler suit 6 speed AB60

Recommended for beach driving or loaded up vehicle where transmission temperatures quickly rise.

Kit is designed to fit at the front on the drivers side between the original transmission cooler and the centre support bracket. These are designed to work with the factory top mount and not compatible with the PDI front mounted intercoolers.

By default, all PDI external transmission coolers are designed to be market leading through:

· Maximum efficiency 29,000BTU (energy dissipation unit of measure).

- Stacked Plate coolers - this is the best design you can use.

· Steel one-piece brackets (zinc plated and coated) to eliminate flexing of the aluminium cooler.

· High quality transmission cooler hose (rated to 400psi). 10mm ID hose with clamps and fittings to connect in series with factory external cooler.

· PDI places outlets on the side or top to prevent air locks inside the transmission cooler.

NOTE: Having the outlets at the bottom will make the installation easier as the pipes are run down under the radiator, BUT if you get an airlock (from initial installation empty) there is a strong chance you will never actually fill the top of the coolers with fluid and designed cooler efficiency may never be reached.